TireMinder Trailer TPMS - Add Transmitters to a New Monitor

To add your existing transmitters to a new monitor, use the following instructions:

1. Make sure you are in Monitoring Mode. Monitoring Mode is the mode where you can switch between °F and °C by pressing and releasing the left button.
2. Press and hold the left and right buttons on the top of the 5 seconds, release once you hear a beep.
3. After the beep you will be in Learn Mode and see the top left tire blinking.
4. Select the tire position you would like to add by pressing and releasing the left or right buttons to move to different tire positions.
5. Screw the transmitter onto the corresponding tire position. Within 12 seconds, you should hear a beep and see the current tire pressure.
6. If you wish to add additional tire positions, repeat steps 4 to 5 until you have added each desired tire position.
7. You will now need to return to Monitoring Mode. Press and hold the left and right buttons for 5 seconds, release once you hear a beep.
8. You should now be back in Monitoring Mode. Confirm this by toggling the temperature using the left button.