TireMinder Trailer TPMS - Complete Reset

To reset your TireMinder Solar Powered Trailer TPMS, please use the following instructions:

1. Remove all transmitters from your valve stems.
2. Make sure you are in Monitoring Mode. Monitoring Mode is the mode where you can switch between °F and °C by pressing and releasing the left button.
3. Press and hold the left and right buttons on the top of the 5 seconds, release once you hear a beep.
4. After the beep you will be in Learn Mode and see the top left tire blinking.
5. Select the tire position you would like to reset by pressing and releasing the left or right button.
6. Once at the desired tire position, press and hold the center button until you hear a beep and see “---“.
7. Repeat Steps 5 and 6 until on tire positions that you would like to reset read “---“.
8. Use the right or left button to select the tire position you would like to add back to the monitor. Note, if your system came with 4 tires, please use the transmitter marked 1 on the driver’s front position, 2 on the passenger front position, 3 on the passenger rear position, and 4 on the driver rear. If your system came with 2 transmitters, please use the transmitter marked 1 on the driver side, and the transmitter marked 2 on the passenger side.
9. Once at the desired position, screw the transmitter onto the corresponding tire position. Within 12 seconds, you should hear a beep and see the new tire pressure.
10. Continue adding the remaining tire positions until all transmitters are back on the valve stems and displaying pressure.
11. Once complete, you will need to return to the Monitoring Mode. Press and hold the left and right buttons for 5 seconds, release once you hear a beep.
12. You should now be back in Monitoring Mode. Confirm this by toggling the temperature using the left button.