To delete a transmitter on your TireMinder Solar Powered Trailer TPMS, please use the following instructions:
- Make sure you are in Monitoring Mode. Monitoring Mode is the mode where you can switch between °F and °C by pressing and releasing the left button.
- Press and hold the left and right buttons on the top of the 5 seconds, release once you hear a beep.
- After the beep you will be in Learn Mode and see the top left tire blinking.
- Select the tire position you would like to delete by pressing and releasing the left or right button.
- Once at the desired tire position, press and hold the center button until you hear a beep and see “---“.
- Repeat Steps 4 and 5 until all tire positions that you would like to delete read “---“.
- You will now need to return to Monitoring Mode. Press and hold the left and right buttons for 5 seconds, release once you hear a beep.
- You should now be back in Monitoring Mode. Confirm this by toggling the temperature using the left button.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article