TireMinder Trailer TPMS - Adjust Baseline Pressures

To adjust the baseline pressures, please use the following instructions:

1. Make sure you are in Monitoring Mode. Monitoring Mode is the mode where you can switch between °F and °C by pressing and releasing the left button.
2. Press and hold the center button on the top of the monitor for 5 seconds, release once you hear a beep.
3. After the beep, you will be in Baseline Pressure Mode and see the top left tire position blinking.
4. Select the tire position you would like to adjust by pressing and releasing the center button on the top of the monitor.
5. Once at the desire tire position, press the right or left button to lower or raise the baseline tire pressure, respectively.
6. If you wish to adjust additional baseline pressures, repeat steps 4 and 5 until you have adjusted all desired tires.
7. You will now need to return to Monitoring Mode. Press and hold the center button for 5 seconds, release once you hear a beep.
8. You should now be back in Monitoring Mode. Confirm this by toggling the temperature using the left button.