TempMinder MRI-015KH Instruction Manual

Initial Setup

1. Insert the stand into the bottom of the monitor.
2. Insert two “AAA” batteries into the rear battery compartment of
   the monitor. Once inserted, the monitor will immediately turn on.
3. On the rear of the monitor, move the sound sensor to the OFF or
   ON position. While on the ON position, the backlight will
   automatically turn on when the monitor senses sound. If you have
   chosen to leave the sensor OFF, use the LIGHT button on the
   back of the monitor to turn the backlight on for 8 seconds.
4. Use the °C/°F button on the front of the monitor to toggle
   between Celsius (°C) and Fahrenheit (°F).
5. (Optional) Plug the AC Adapter into the DC 5V input on the rear of
   the monitor and into a 120V outlet. AC Adapters may be
   purchased from www.MinderResearch.com.

Setting the Time

The TempMinder Indoor Comfort Station comes preprogrammed in 24
hour or Military Time. To toggle between 24 or 12 hour time, press and hold
the 12/24 button for 5 seconds. Please note, you must have the time
displayed on the monitor to toggle between time modes.

1. While the time is displayed, press and hold MODE for 5 seconds
   until you see the Hour flashing.
2. Use the ▲ button to move the Hour up; use the ▼ button to
   move the Hour down.
3. Press and release the MODE button and you will see the minutes
   flashing.
4. Use the ▲ button to move the Minutes up; use the ▼ button to
   move the Minutes down.
5. Press and release the MODE button and neither the Hour or
   Minutes will be flashing and the time will be set.

Setting the Date

1. Press and release the MODE button until you see a date displayed
   on the monitor. By default, the date on the monitor will display
   1/1.
2. Once the date is displayed, press and hold the MODE button for 5
   seconds until you see the Year blinking. By default, the year is set
   to 2011.
3. Use the ▲ button to move the Year up; use the ▼ button to move
   the Year down.
4. Press and release the MODE button and you will see the Month
   flashing.
5. Use the ▲ button to move the Month up; use the ▼ button to
   move the Month down.
6. Press and release the MODE button and you will see the Day
   flashing.
7. Use the ▲ button to move the Hour up; use the ▼ button to
   move the Hour down.
8. Press and release the MODE button and the Date will be set.

Setting the Alarm

1. Press and release the MODE button until you see the icon on
   the top left of the time section.
2. While the time is displayed, press and hold MODE for 5 seconds
   until you see the Hour flashing.
3. Use the ▲ button to move the Hour up; use the ▼ button to
   move the Hour down.
4. Press and release the MODE button and you will see the minutes
   flashing.
5. Use the ▲ button to move the Minutes up; use the ▼ button to
   move the Minutes down.
6. Press and release the MODE button and neither the Hour or
   Minutes will be flashing and the alarm will be set.

Turn the Alarm On / Off

Press and release the ▲ button to toggle the alarm off and on. The icon
will display when the alarm is on.

Snooze

Press and release the SNZ button on the front of the monitor or the SNOOZE
button on the rear of the monitor to initiate the 8-minute snooze.

Display Max/Min Temperature and Humidity

1. Press and release the MAX/MIN button to display the maximum
   temperature and humidity. Note the MAX next to the humidity.
2. Press and release the MAX/MIN button to display the minimum
   temperature and humidity. Note the MIN next to the humidity.
3. Press and release the MAX/MIN button to display the current
   temperature and humidity. Note that neither MAX nor MIN are
   displayed next to the humidity.

Specifications

Minder Division of Valterra Products

3000 SE Waaler Street

Stuart, FL 34997