How to Replace, Add, or Remove a Transmitter On The TireMinder Smart TPMS

How to Replace a Transmitter on the TireMinder Smart TPMS

First use the "Removing a Transmitter" instructions to delete your current transmitter, then use the "Adding a Transmitter" instructions to successfully replace a single transmitter.

How to Remove a Transmitter on the TireMinder Smart TPMS

1. Open the TireMinder TPMS App.
2. Touch "Learn" on the bottom bar.
3. Towards the center of the screen you will see two buttons labeled "Learning Mode" and "Delete Mode," click "Delete Mode."
   
4. Touch the transmitter you would like to remove from your system.
5. Once touched, the transmitter will disappear from the display and be deleted from the TireMinder TPMS App.

How to Add a Transmitter on the TireMinder Smart TPMS

1. Open the TireMinder TPMS App.
2. Touch "Learn" on the bottom bar.
3. Towards the center of the screen you will see two buttons labeled "Learning Mode" and "Delete Mode", make sure "Learning Mode" is highlighted. If "Learning Mode" is not highlighted, press on "Learning Mode."
4. Touch the tire position you would like to add a transmitter to. Once touched, you will see "Learning" on the display.
5. Attach the transmitter to valve stem of the corresponding tire position (if you clicked the driver’s front, add the transmitter to your driver’s front tire).
6. Once the transmitter is on the tire, allow up to 20 seconds for the TireMinder TPMS App to find the sensor and display it on the screen. Once found, the tire position will turn green and display the tire’s pressure and temperature on the screen.
   
7. You may add as many transmitters using the same directions as above (up to 22 in total).