TireMinder i10 - Adding Transmitters

Your TireMinder i10 can add up to 10 tires, per vehicle. To add transmitters, please following the instructions. Note, you do not need to delete any currently learned transmitters in order to add additional transmitters.

1. From MONITORING mode, press and hold the LEFT and RIGHT buttons until you hear a beep and see LEARN near the top center of the screen.
2. Using the RIGHT or LEFT buttons, move to the tire position you would like to add.
3. Once at the tire position you would like to add, screw a transmitter onto that corresponding tire position. Within 6 seconds you will hear a beep and see the current tire pressure.
4. Continue adding transmitters using steps 2 and 3. If you are done adding transmitters, return to monitoring mode by pressing and holding the left and right buttons for 5 seconds until you hear a beep and see MONITORING in the top center of the display.

Moving A Single Transmitter

1. Remove the transmitter you wish to move from the valve stem and set it aside.
2. From MONITORING mode, press and hold the LEFT and RIGHT buttons until you hear a beep and see LEARN near the top center of the screen.
3. Using the RIGHT or LEFT buttons, move to the tire position you would like to replace.
4. Once at the tire position you would like to move, press and hold the center button until you hear a beep and see “- -” instead of a tire pressure. The transmitter is now deleted.
5. Using the RIGHT or LEFT buttons, move to the tire position you would like to add the transmitter and screw the transmitter onto the corresponding valve stem. Within 6 seconds, you should see the “- -“ icon change to the current tire pressure. If you are done moving transmitters, return to monitoring mode by pressing and holding the left and right buttons for 5 seconds until you hear a beep and see MONITORING in the top center of the display.

Deleting A Single Transmitter

1. Remove the transmitter you wish to delete from the valve stem and set it aside.
2. From MONITORING mode, press and hold the LEFT and RIGHT buttons until you hear a beep and see LEARN near the top center of the screen.
3. Using the RIGHT or LEFT buttons, move to the tire position you would like to replace.
4. Once at the tire position you would like to delete, press and hold the center button until you hear a beep and see “- -” instead of a tire pressure. The transmitter is now deleted. If you are done deleting transmitters, return to monitoring mode by pressing and holding the left and right buttons for 5 seconds until you hear a beep and see MONITORING in the top center of the display.

Removing A Single Transmitter 

1. Remove the transmitter you wish to replace from the valve stem and set it aside.
2. From MONITORING mode, press and hold the LEFT and RIGHT buttons until you hear a beep and see LEARN near the top center of the screen.
3. Using the RIGHT or LEFT buttons, move to the tire position you would like to replace.
4. Once at the tire position you would like to replace, press and hold the center button until you hear a beep and see “- -” instead of a tire pressure. The transmitter is now deleted.
5. With the original transmitter deleted, screw the new transmitter onto the same valve stem. Within 6 seconds, you should see “- -“ change to the current tire pressure. If you are done replacing transmitters, return to monitoring mode by pressing and holding the left and right buttons for 5 seconds until you hear a beep and see MONITORING in the top center of the display.