To replace a transmitter on the TireMinder Solar Powered Trailer TPMS, please use the following instructions:
- Remove the original transmitter you wish to replace from the valve stem.
- Make sure you are in Monitoring Mode. Monitoring Mode is the mode where you can switch between °F and °C by pressing and releasing the left button.
- Press and hold the left and right buttons on the top of the 5 seconds, release once you hear a beep.
- After the beep you will be in Learn Mode and see the top left tire blinking.
- Select the tire position you would like to replace by pressing and releasing the left or right buttons to move to different tire positions.
- Once at the desired tire position, press and hold the center button until you hear a beep and see “---“.
- Screw the transmitter onto the corresponding tire position. Within 12 seconds, you should hear a beep and see the new tire pressure.
- If you wish to replace additional tire positions, repeat steps 5 to 7 until you have replaced the desired tire positions.
- You will now need to return to Monitoring Mode. Press and hold the left and right buttons for 5 seconds, release once you hear a beep.
- You should now be back in Monitoring Mode. Confirm this by toggling the temperature using the left button.