The last part of setting up your TireMinder i10 is informing the monitor what tire pressures you’re currently running.
Step 1: From Monitoring Mode, press and hold the center button for 5 seconds until you see P in the center of the display.
Step 2: PSI should now be flashing on your display. You may press and release the right or left buttons to toggle between PSI (Pounds per Square Inch) and Bar (Barometric Pressure). Pressing and releasing the center button will move you to °F. With °F flashing, you may press and release the right or left button to toggle between °F (Fahrenheit) or °C (Celsius).
Step 3: Once you have selected your desired units of measurement, press and release the center button. You will now see your first tire position blinking.
Step 4: While the tire position is blinking, you may use the right or left buttons to raise or lower the tire pressure, respectively. Use these buttons to set the appropriate (or cold) baseline tire pressure for your vehicle. Once set, press and release the center button to move to the next tire.
Step 5: Repeat Step 4 until you have set each tire’s appropriate tire pressure. Once complete, press and hold the center button for 5 seconds until you see MONITORING in the center of the display.