Adding A Transmitter From The TireMinder Smart TPMS App
Use the following directions to add a transmitter to the TireMinder Smart TPMS App. Please make sure there is a CR1632 battery in the transmitter before starting the process below.
- Open the TireMinder Smart TPMS App.
- Touch “Learn” on the bottom bar.
- Towards the center of the screen you will see two buttons labeled “Learning Mode” and “Delete Mode”, make sure “Learning Mode” is highlighted. If “Learning Mode” is not highlighted, press on “Learning Mode”.
- Touch the tire position you would like to add a transmitter to. Once touched, you will see “Learning” on the display.
- Attach the transmitter to valve stem of the corresponding tire position (if you clicked the driver’s front, add the transmitter to your driver’s front tire).
- Once the transmitter is on the tire, allow up to 20 seconds for the TireMinder Smart TPMS App to find the sensor and display it on the screen. Once found, the tire position will turn green and display the tire’s pressure and temperature on the screen.
- You may add as many transmitters using the same directions as above (up to 22 in total).
Removing a Transmitter From The TireMinder Smart TPMS App
Use the following directions to remove a transmitter from the TireMinder Smart TPMS App.
- Open the TireMinder Smart TPMS App.
- Touch “Learn” on the bottom bar.
- Towards the center of the screen you will see two buttons labeled “Learning Mode” and “Delete Mode”, click “Delete Mode”.
- Touch the transmitter you would like to remove from your system.
- Once touched, the transmitter will disappear from the display and be deleted from the TireMinder Smart TPMS App.
Why Remove a Transmitter?
- You purchased a new RV (congrats!) and want to move the transmitters to a different location.
- The transmitters were removed and you’re unsure of the original tire position of the transmitters.
- A transmitter has become damaged and failed.
- For fun? This smartphone stuff is pretty amazing… We’ve been playing with it for hours.