TireMInder TM55 - Delete and Reinstall a Transmitter

Follow these steps if you need to replace a single transmitter on your TireMinder TM55 monitor.

1. Enter the Learn Mode by pressing and holding the DN and UP buttons until you hear a beep.
2. Press and release the UP button until you get to the tire position you wish to replace.
3. Once there, press and hold the center button until the green LED light at the top of the monitor turns to red with and shows "- - - PSI"
4. Attach the new transmitter. The LED should turn green again within 10 to 15 seconds.
5. Exit the Learn Mode the same way you entered by pressing and holding both the DN and UP buttons until you hear a beep.